Ridgid K-40 Sink Machine (71722) & Ridgid K-60 Sectional Machine (66497)

Description

Ridgid K-40 Sink Machine (71722) & Ridgid K-60 Sectional Machine (66497)
Ridgid K-40 Sink Machine (71722)
For 3/4" (20 mm) to 2 1/2" (75 mm) Drain Lines
The Model K-40 Sink Machine is ideal for cleaning small secondary drain lines from 3⁄4" (20 mm) to 2 1⁄2" (75 mm).
1/4" (6 mm) cables best for 3/4" (20 mm) to 1 1/2" (40 mm) lines
5⁄16" (8 mm) cables best for 3/4" (20 mm) to 1 1/2" (40 mm) lines
3⁄8" (10 mm) cables best for 1 1/4" (40 mm) to 2 1/2" (75 mm) lines
The K-40 sits flat on the floor or countertop and also tips onto its back for easy access to sink drains and bathtubs full of water. The K-40 practically eliminates job site cleanup thanks to the patented Guide Hose two-way AUTOFEED®. It completely contains the rotating cable and eliminates any waste water splashing or spraying.
Features
175 W induction motor quietly delivers enough torque to clear even the toughest blockages
Premium-quality, compression-wound inner core cable combines strength and flexibility to resist kinking
Two-piece “twist lock” drum housing will not dent or corrode and allows easy access to the inner drum and cable
Special inner drum design virtually eliminates cable flip-over inside the drum and drum leakage
Two-way AUTOFEED advances and retrieves the drain cleaning cable with a simple push of a lever keeping you and the work area clean
Includes RIDGID® drain cleaning gloves and operator’s manual
Includes
K-40AF  Machine with: AUTOFEED, Guide Hose, Mounting Bracket, C-13IC SB, 5/16" x 35' (10.7m) Speed Bump Cable w/Inner Drum
Ridgid K-60 Sectional Machine (66497)
Ridgid K-60 Sectional Machine 60052
For 1 1/4" to 4" (32-100mm) Drain Lines
Features
A compact machine for institutional, commercial or residential cleaning. Also ideal for septic tank vacuum truck operators. Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages.
Ideal for rooftop vent stacks. Rear handle allows for easy transporting up ladders and onto rooftops.
Remove only two bolts to access jaw set for cleaning or replacement. Removal of same bolts provides access to belt drive.
Equipped with 1/2 HP motor.
CSA approved.
Approved to UL standards (NRTLC).
Includes
Machine with A-1 Operator’s Mitt, A-12 Pin Key, and A-60-12 Rear, Guide Hose, plus: A-61 Tool Kit and A-62 Cable Kit