Compressed Air Driven Hydraulic Pipe Bender (13Tons - 1/2"-3") (W-3Q)

Description

HYDRAFORE
W
-3
Q
Compressed Air Driven Hydraulic Pipe Bender (1/2" - 3")
The Air Hydraulic Pipe Benders can be operated by air compressor or by hand. These benders are for precision cold bending of thick-walled pipes (gas, water and steam pipes, non-heated black iron pipes, galvanized pipes, schedule 40 & 80) up to 900 following GB/T 3091,DIN 2440,EN 10255,BS1387 standards.
●Capable of bending angles from 0° to 90° on pipes ranging from 1/2”to 4”.
●Cold bending, no pre-warming of pipe is required.
●Works quicker with air compressor.
●Can be operated by hand when air compressor is not available.
●Rugged construction for use in tough work sites.
●Fast and easy setup, simple to use.
●Supplied in a wooden case with a set of bending shoes and service pack.
Technical parameters:
Model:
W-3Q
Capacity (ton):
13
Max stroke (in):
10
Air pressure (psi):
120
Bending formers (in):
1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3"
Pipe wall thickness (in):
0.10 - 0.20
Weight (lbs):
250