430 4' X 10' Stainless Steel Sheet Wall Covering, 24 Gauge 0.024"

Description

Item details:
Alloy:
430 Stainless Steel
Size:
4'x10' = 48"x120"
Thickness:
24 gauge 0.024"=0.62 mm
Characteristics:
Brushed Finish
Workability:
Good candidate for some processing techniques. Great corrosion resistance.
Applications:
Sink back splash, appliance faces, counter tops, mechanical access panels, restroom panels,
and door kick plates
Packing:
PVC film on one side. Wrapped and rolled in tall corrugated box for mail, may need to be unrolled. If you prefer receiving flat sheet which will be shipped by freight company please message me and I will calculate shipping charge.
Installation
:
You will need to buy construction adhesive/contact cement. We
recommend
FORMICA F-140-05.
Turn the stainless steel face down on the floor. Apply adhesive to each corner of the steel tile and all the way around the perimeter for added holding power.
Place the stainless steel up to the wall and press it on firmly. Apply long strips of painter's tape over the steel and secure the ends of the tape to other areas of the drywall. The tape adds support until the adhesive dries.
Wait 24 hours, and then remove all of the painter's tape. Carefully peel off the PVC facing from the front of the stainless steel.
Please visit
Store
for Stainless Steel Divider Bar( middle
molding
),J-cap (End Trim), Inside Corners, Outside Corner, U channel etc.
We do volume discount. And We ship all over the country.
*****************************************************************************************************************************
Popular Products & Materials:
Hot / Cold Rolled Steel
Plates & Sheets & Angles & Flats
Galvanized & Stainless Steel
Sheets & Plates & Angles &Tubing, Piping & Flats & Rods
Service we offer:
Sawing, Shearing & Flame Cutting
Welding
Hole Punching
If you need any extra service please message me. There maybe a small extra charge.